Research Paper Writing- Lab Report

EET 1198                                                                                            NAME ____________________

ACTIVITY2                                                                                       DATE __________

  1. Build the given circuit in Multisim. Connect each output (W, X, and Y) to a current limiting resistor and an LED to indicate its “ON”/”OFF” status. Make each switch so that it is controlled by different keys on the keyboard. The keys you choose should be in some logical order or location on the keyboard so that it is simple to toggle the switches on and off for all combinations. Test each input in the provided truth table, and record the corresponding outputs in the table. Show the working simulation to the instructor.

Teacher Check________

  • Determine the correct IC, find the pinout diagram, and make a list of what each pin on the IC will be connected to below. Then, breadboard the circuit using the switches on the trainer for inputs and running the W, X, and Y outputs each to a current limiting resistor and an LED on the trainer. Verify your output for each input combination in the given truth table. Show the working circuit to the instructor.

Teacher Check________

Pin 1-

SW7   SW6   SW5   SW4W    X     Y
0         0         0         0   0         0         0         1   0         0         1         0   0         0         1         1   0         1         0         0   0         1         0         1   0         1         1         0   0         1         1         1   1         0         0         0   1         0         0         1   1         0         1         0   1         0         1         1   1         1         0         0   1         1         0         1   1         1         1         0   1         1         1         1   

Pin 2-

Pin 3-

Pin 4-

Pin 5-

Pin 6-

Pin 7-

Pin 8-

Pin 9-

Pin 10-

Pin 11-

Pin 12-

Pin 13-

Pin 14-

For help contact us via proessaywiters@gmail.com

 

Leave a Reply